In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and techniques that you can use.

For those who have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other areas of the house, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: http://jacs.jp/?p=3602 This is the initial part of the setup that will look a little scary at first, but it is really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape out of the cardboard, so you’ll have to cut around the edge of the mask so you get something that resembles a cone. The most important thing here is to be realistic with what kind of paper plate which you’re using.

Then you’ll have to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can ensure that nothing will leak once you place the mask on. Be sure that the edges are cut so that the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask , so you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint once you are done, so you don’t wind up with smudges or smears on your dog.

Then it’s time to glue the mask on your dog’s head. First you need to be certain that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you can start to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the base of the mask and fold it over. Be sure that it’s quite powerful and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you’ve got the mask snugged firmly onto the surface of your dog. Do not make the folds too large or else it could look messy. As soon as you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask on the dog. Be sure the ears are level and be certain it is not too short or long as this will cause some problems with the mask slipping off the dog’s face.

If you’re using a dog mask as your dog protection, you’ll have to do some sanding to be sure that it is secure on your dog. You can accomplish this by sanding off any excess paper that may have been removed from your mask.